46, Podilska St., Ternopil, Ukraine, +38096-22-99-290

About the company

The company “KVOTA” was founded in 1991. 

Its main activities are focused on distribution of standardized components for molds and dies; designing and manufacturing technological rigging based on ISO standards, including molds with traditional and hot runner systems.

An enterprise successfully cooperates with such companies as:  

  • "FCPK-Bytow" (Poland) - standardized components for molds and dies (equivalents to HASCO, DME, Meusburger);
  • "CZAKI THERMO - PRODUCT" (Poland), "ELWIK" (Poland),"GC-HEAT" (Germany) - heating plates (delimiters), hobs, thermocouples, cartridges of heating, regulators of temperature et cetera;
  • "SELS" (Poland) - sensors and other;
  • "BOTZIAN&KIRCH" (Germany) - polishing and grinding instrument;
  • "CRC Industries Europe bvba" (England), "MILAR Sp.z o o" (Poland) – Ambersil brand facilities for greasing, cleaning and defence of the molds.

The main goal of JSE "KVOTA" is to help Ukrainian technological rigging producers to integrated into the global market through the introduction of standardized parts, that meet the requirements of ISO.    

 

We supply and sell standardized parts produced by the firm “FCPK-BYTOW” ( Poland), which is a part of the American corporation “Superior Die Set Corporation Company” (Milwaukee, Wisconsin). The corporation is the leader in manufacturing of bodies to the dies and components for the molds as well as standardized parts for the molds and dies. FCPK-BYTOW is the largest producer of this type of production in Poland. More than 40 % of its production FCPK-BYTOW exports to the United States, Germany, Finland Czech Republic, Slovakia, Hungary, Latvia and Ukraine.

 

One of the priority directions of development of the Ukrainian economy is its integration into European and world markets. Based on this, we need to introduce into production a new advanced technology using the world standards. 

 

All production satisfies ISO 9001 certification.

 

What does application of ISO standards give to the producer of the technological rigging? Our collaboration with the Ukrainian firms have already shown the advantages of the application of ISO standards in the production. They are:

  • the speed of production and a significant reduction in production lead time;
  • high quality and moderate price;
  • complete interchanging;
  • a long rigging life.

 


The spectrum of the standardized details is very wide. Some of them are:

  • round, flat and tubular ejectors tempered and nitrided, long up to 1000 mm with the diameter from 0,8 mm, of metrical and inch implementation;
  • directing hobs cemented, bronze and with bronze coverage,self-lubricating with graphite insertions;
  • directing columns, separators, screw-bolts, ring-bolts, sprue bushing, springs, posts, ball-shaped fixing, nipples, easily removable connections and others;
  • steel and aluminium plates (Fortal, Certal), units for the molds and dies;
  • hot-channel systems and components to them.

 

We are permanent participants of the international specialized exhibitions ("Primus": Industry of Plastics", "Intertool", "Primus", "Mashprom", "Engineering of Kharkiv Region", "Engineering and Metallurgy"...). We invite you to visit our stands!

 

"We conduct studies and consultations to the technological rigging designers on application of normals and introductionof the hot-channel systems, and also provide catalogues on the standardized products and catalogues on interchanging of products of firm FCPK-BYTOW with other famous firms which are producers of rigging.

JSE "KVOTA" does not only supplies with normals to the dies and molds but also designs and, on possibility, makes rigging on the base of standards of ISO, including pates with the traditional and hot-channel systems. At the same time our sales department supplies with repair parts and expenditures to the electro-erosive machine-tools:wire (0,10 : 0,25 mm), graphite, dielectric, deionized resin, filters et cetera; facilities for greasing, cleaning and defence of the molds.; elements of the industrial heating and thermal ocontrol; sensors and industrial automation.

 

„World technics and technology”, 2004.

 

   The application of standard components allows:

  • to reduce time of mold manufacturing;
  • to reduce material costs;
  • to increase of molds service life;
  • to increase the maintainability of molds, thanks to standard components interchangeability;
  • to appraise the cost of the mold at the initial design stage;
  • to reduce errors at the stages of designing and manufacturing of molds;
  • to reduce working time of designer in developing of design documentation for molds;


            You produce only shape elements for molds yourselvesand standard parts you order from catalogue.

 

 

 

PHOTOGALLERY

 

PHOTOS manufactured molds

 

Nice Ternopil city